Fram Grabber>
PCI-X bus / Camera Link IF
Frame Grabber Board
APC-3316A
| Type Name | APC-3316A |
| Image Capture | Supports Camera Link cameras (Base to Full Configuration) Input data width: Up to 64bit Input frequency: Up to 80MHz Implemented data rearrangement function for multi-tap line camera |
| Camera Control | Supports PIRANHA3 camera (default) CC1: EXSYNC output CC2: PRIN output CC3: Reserved (unused) CC4: Reserved (unused) Capable of CC5 to CC8 output (same signals as CC1 to CC4) |
| Encoder | RS-422 digital interface (A/B/Z phase) Internal trigger, external trigger, count start by Z phase Built-in 32-bit counter Built-in 32-bit and 16-bit comparators (one set each) Generates image capture trigger or line trigger when comparator matched Input frequency: Up to 1MHz (when the duty is 50%) |
| System bus | PCI-X Rev1.0b 64bit/133MHz |
| FIFO Memory | 128Mbyte |
| Interrupt | Capable of generation at the end of DMA and the start of capture (#INTA) |
| Power Requirement | +5V: 3A +3.3V: 1A (Max) |
| Environment | Operating temperature: 0ŽˇC to 50ŽˇC Humidity : 35% to 85% (non-condensing) |
| Dimension | 224.0mm(W)x106.68mm(D), Panel Width 20mm |
| Weight | 180g |
| Software | Drivers and "C" libraries for Windows XP/ Vista/ Server2003ˇˇ˘¨Option |
| 1)This board is designed for PCI-X bus only. Be
careful, it does not operate if installed on PCI bus. 2)This board does not support PCI-X 66. Install this board in PCI-X 133 or PCI-X 100 slot. |
|
Line Sensor Camera:
BASLER, DALSA, NED, TOSIBA TELI, TAKEX
Area Sensor Camera:
Adimec, BASLER, CIS, DALSA, HITACHI
PSM-3316-01:
PSM-3316-01 is a distributive option board.Image data from APC-3316A is reconverted into camera link dataand out put to the next APC-3316.
PSM-3316-03:
PSM-3316-03 is an image processing unit developed for APC-3316A.It could be installed with large-scale, mass FPGA,and designed for doing much image processing on the hardware.
