Fram Grabber>
PCI Express bus /
Analog Camera Multi ch IF
Frame Grabber Board
APX-336
| Type Name | APX-336 |
| Video input | (NTSC) RS170A/NTSC monochrome video signal up to 4 video inputs / monochrome Resolution 8-bit External Trigger / Internal Trigger Sampling clock 12.273MHz Aspect ratio 1:1 External Trigger for a camera with External Trigger: HD, VD Output level : High-Impedance 5Vp-p/75¦¸ 2Vpp |
| Video input (Progressive Scan) |
Frame capture rate Monoclome Interless : 1/30 sec. or 1/60 sec. 4ch multiplex or 2ch simultaneous / monochrome External Trigger Sampling clock 12.273MHz/24.545MHz Aspect ratio 1:1 External Trigger for a camera with External Trigger: HD, VD Output level : High-Impedance 5Vp-p/75¦¸ 2Vpp |
| Frame Buffer Memory | 32Mbytes |
| External Trigger (TTL) | 2ch |
| Camera Trigger output | 1ch (Control signal for Video input) |
| Interrupt | Start of capture, End of capture, FIFO error, End of DMA |
| System Bus | PCI Express bus x1 lane (Rev 1.1 compliance) Chip set PEX8311 |
| Power Requirements | +3.3V 1.5A(max), +12V 0.3A(max) |
| Environment | Operating Temperature 5ŽˇC to 50ŽˇC Relative Humidity 35% to 85%(non-condensing) |
| Dimensions | 167.65mm(W)x111.15mm(D), Panel width 20mm |
| Weight | 200g |
| Software Environment | Drivers and "C" libraries for Windows XP/ Vista/ Server2003ˇˇ˘¨Option |
Area Sensor Camera:
Adimec, CIS, JAI Pulnix, SONY, TAKEX, TOSHIBA, TOSHIBA TELI
